Fujitsu Primepower200 User Manual page 81

 To prevent condensation in the PRIMEPOWER400 Pedestal Server, do not raise the ambient room
temperature rapidly in winter.
Use the PRIMEPOWER400 Pedestal Server only after it has warmed up sufficiently.
 Do not install the PRIMEPOWER400 Pedestal Server near EM noise generating devices such as
photocopiers, air conditioners, or welders.
 Take electrostatic prevention measures. Note that some carpets generate static electricity easily and can cause
the PRIMEPOWER400 Pedestal Server to malfunction.
 When moving the PRIMEPOWER400 Pedestal Server, do not pull on the front cover. Otherwise, the Server
may be damaged.
4.3.2 Installation specifications
Table 4.2 and Table 4.3 show the installation specifications for the PRIMEPOWER400 Pedestal Server.
*1:
*2:
Table 4.2 Installation Specifications of the PRIMEPOWER400 Pedestal Server (1/2)
Item
Weight
Power Supply Frequency
Voltage
Max. Current
Leak Current
Frame Resistance
Temperature Operating
Non-operating
Humidity Operating
Non-operating
Vibration Operating
Non-operating
Noise
Form Factor
If the ambient temperature exceeds 35 deg. C (95 deg. F) during operation, a warning message is
displayed. Take steps to rectify the problem immediately.
The indicated noise is the mean value of measurements obtained in a low-noise anechoic chamber.
The actual noise measured at the installation site may be greater than the indicated value due to
background noise and echoes.
Specification
125 kg (275.94 lb.) (max.)
50/60 Hz (+2 ~ -4%)
Single phase Single phase
±
AC100V ( 10%) AC200V (
12.0 A 6.0 A
²
3.5 mA
²
100Ω
û
5 ~ 35 C (+41 ~ +95 F) (*1)
û
0 ~ 50 C (+32 ~ +122 F)
20 ~ 80% RH (non-condensing)
8 ~ 80% RH (non-condensing)
0.2 G
0.4 G
47 db(A) (*2)
Pedestal
4.3 Preparations for Use
±
10%)
53