2.4.1 Adding CPU modules
A total of two CPU module slots are provided on the PRIMEPOWER200 Pedestal Server Systemboard.
When adding CPU modules the following restrictions apply:
Only a SPARC64 GP processor can be used.
To ensure they all operate at the same clock speed, have the same cache size and use the same CPU stepping,
the model name must be identical for all CPUs.
CPU modules must be added according to Table 2.4 .
IMPORTANT
Operation for configurations other than those shown in Table 2.4 cannot be guaranteed.
2.4.2 Adding memory modules
A total of 16 memory module slots are provided on the PRIMEPOWER200 Pedestal Server Systemboard.
When adding memory modules the following restrictions apply.
IMPORTANT
Operation for configuration other than those described below cannot be guaranteed.
Each sequential group of 4 memory slots (#0-3, #4-7, #8-11, #12-15) must be either left empty or completely
filled with 4 identical memory modules.
Table 2.4
Allowed CPU Module Configurations
CPU slot #
No. of
No. of
CPUs
DDCs
#0
#1
1
O
-
2
O
O
2.4 Expanding the Server Unit
DDCs to be added
(incremental)
2
DDC #0, DDC #1
4
DDC #2, DDC #3
21