Figure 5.5 Turning The Power On - Fujitsu Primepower200 User Manual

CHAPTER 5 PRIMEPOWER400 Rackmount (4U) Server
Note:
5.3.5 Turning the power off
The following describes how to turn the power off.
CAUTION
78

Figure 5.5 Turning the power on

3
Press the POWER switch on the control panel of the PRIMEPOWER400 Rackmount (4U)
Server.
The POWER LEDs of the PRIMEPOWER Server and any peripheral devices connected via the
RCI port should now light up.
Operation of the POWER switch is disabled when the MODE switch is set to SECURE.
A keyboard power-on function is not supported.
Data Destruction
Before turning the power off, check the answer to each of the following points is
"No", or data may be lost:
 Are there any currently executing programs?
 Are there any current users?
 Are floppy disks or tape cartridges still inserted in their drives?
Backup files as necessary before turning the power off.
Also, do not turn off the console while the PRIMEPOWER Server is turned on.
When the MODE switch is set to AUTO or MANUAL, a break signal may cause
the bootup sequence to shift to display of the ok prompt during Solaris operation
potentially causing data to be lost.