Scsi Id - Fujitsu Primepower200 User Manual

(3) Eject Button
(4) Data Cartridge Slot

11.4.2 SCSI ID

Set the SCSI ID of the DAT drive to "5".
Table 11.4
LED
Tape Clean
Dark Dark
Lit
Blinking
(1/2sec interval)
Blinking
(1/4sec interval)
(any) Lit
Blinking
(1/2sec interval)
CAUTION
Press the Eject button to remove the data cartridge. Before removing a data cartridge, make sure
that the tape LED is out.
If the DAT Software (or operating system) has disabled removal of a data cartridge, the cartridge
cannot be removed by pressing the Eject button.
CAUTION
DAT Drive LED Indicators
DAT Drive Status
Data cartridge is not loaded.
Data cartridge is loaded.
Tape is loading / unloading, or drive-diagnostics are
running.
Accessing tape ( Read / Write )
Drive has malfunctioned.
Tape head cleaning is required, or needs replacing.
Data Destruction
Do not press the Eject button during operation (when the tape LED
is blinking). If the Eject button is held down for about five seconds,
the forced ejection function will execute, and any data being written
may be lost.
Never insert your fingers or other foreign objects in the data
cartridge slot, as this may damage the unit or cause data to be lost.
11.4 DAT Drive (DDS4)
199