Fujitsu Primepower200 User Manual page 78

CHAPTER 4 PRIMEPOWER400 Pedestal Server
(6) CHECK LED
(7) POWER LED
50
IMPORTANT
When the PRIMEPOWER400 Pedestal Server detects an error in the power line or
abnormal temperatures, the CHECK LED blinks and the power is automatically turned off
to prevent unit damage and ensure safety.
The CHECK LED blinks or lights up when the PRIMEPOWER400 Pedestal Server detects an error.
When the power is turned on, the CHECK LED lights up and then goes out. This is not an error. If
the CHECK LED stays lit and does not go out at power on, this indicates an error.
When an error occurs, note down the details displayed on the LCD panel, and contact a service
engineer.
The POWER LED indicates the power state of the system. This LED lights up when the power is
on, and goes out when the power is turned off.