Operating Environment - Fujitsu Primepower200 User Manual

Operating Environment

This product has been designed and produced to be used safely by general users in a general office environment.
When using this product, observe the installation and handling precautions described in this manual.
Prohibited Uses
This Product is designed, developed and manufactured as contemplated for general use, including without
limitation, general office use, personal use and household use, but is not designed, developed and manufactured as
contemplated for use accompanying fatal risks or dangers that, unless extremely high safety is secured, could lead
directly to death, personal injury, severe physical damage or other loss (hereinafter "High Safety Required Use"),
including without limitation, nuclear power core control, airplane control, air traffic control, mass transport
operation control, life support, weapon launching control. You shall not use this Product without securing the
sufficient safety required for the High Safety Required Use. Hence, if these products are used in such hazardous
environments, FUJITSU LIMITED and SUN MICROSYSTEMS, INC. Do not warrant them at all. If you wish to
use this Product for High Safety Required Use, please consult with our sale person in charge before such use.
Documents produced by FUJITSU may contain technology controlled under the Foreign Exchange and Foreign
Trade Control Law of Japan. Those documents containing such technology should not be exported from Japan or
transferred to anyone other than residents of Japan without first obtaining license from the Ministry of
International Trade and Industry of Japan in accordance with the above law.
FCC Class A Notice
Trademarks
 Solaris is a trademark of Sun Microsystems Inc.
 SPARC64 is a registered trademark or trademark of SPARC International, Inc. in the United States and other
countries, under license by Fujitsu Ltd.
iv
CAUTION
This equipment has been tested and found to comply with the limits for a Class digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in
a commercial environment. This equipment generates, uses, and can radiate radio
frequency energy, and if not installed and used in accordance with the instruction
manual, may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in which case
the user will be required to correct the interference at his own expense.
This product is compliant with harmonics guidelines.