Figure 3.3 Control Panel; Names And Functions Of Parts - Fujitsu Primepower200 User Manual

3.2 Names and Functions of Parts

This section describes the names and functions of parts on the front, control panel and rear of the
PRIMEPOWER200 Rackmount (4U) Server.
3.2.1 Front side
The names and functions of parts on the front of the PRIMEPOWER200 Rackmount (4U) Server are as follows.
(1) Control panel
3.2.2 Control panel
The PRIMEPOWER200 Rackmount (4U) Server is provided with the control panel shown in Figure 3.3 .
Note:
8mm Tape Unit or
DAT(DDS4) Unit (option)
Figure 3.2
Contains various switches and indicator LEDs. See "3.2.2 Control Panel" for details.
(1) RESET Switch
(3) REQUEST Switch
(2) MODE Switch
To prevent erroneous operation, all push-button switches on the control panel are designed not to
function unless held down for at least 0.3 seconds.
CD-ROM Unit
Front of PRIMEPOWER200 Rackmount (4U) Server
REQUEST RESET CHECK POWER
SECURE
MANUAL
AUTO
(6) CHECK LED (Amber)
Figure 3.3 Control Panel
3.2 Names and Functions of Parts
(1) Control Panel
(4) LCD Panel
(5) POWER Switch
(7) POWER LED (Green)
27