Rear Side - Fujitsu Primepower200 User Manual

9.2.2 Rear side

The names and functions of parts on the rear of the Expansion Disk Cabinet are as follows.
(1) SCSI connectors
(1) SCSI connectors
SCSI OUT (Expansion)
SCSI IN (Expansion)
SCSI OUT (Base)
SCSI IN (Base)
(2) RCI connector
(3) AC power input
(4) AC main line switch
Figure 9.2
The Expansion Disk Cabinet is equipped with two built-in SCSI connectors, one for the base SCSI
bus and the other for the expansion SCSI bus.
In the base configuration, connect the SCSI cable only to the SCSI IN (base) connector and connect
the terminator plug to the SCSI OUT (base) connector.
If the Disk Expansion Unit is installed, connect the SCSI cable to the SCSI IN (expansion)
connector and connect the terminator plug to the SCSI OUT (expansion) connector.
Empty Bay for
a Redundant
Power Supply
(option)
Rear of Expansion Disk Cabinet
9.2 Names and Functions of Parts
169