Figure 7.4 Rear Of Primepower600 Pedestal Server; Rear Side - Fujitsu Primepower200 User Manual

7.2.3 Rear side

The names and functions of parts on the rear of the PRIMEPOWER600 Pedestal Server are as follows.
(11) 100Base-TX port
(10) Keyboard port
(5) Power control port
(1), (2) AC power inputs
(3) Base PCI slots, (4) Expansion PCI slots (option)
(5) Power control port (label : PC)
(6) UPS port (label : UPS)
(7) RCI port (label : RCI)
(1) AC power inputs
(7) RCI port
(8) Serial port A
(9) Serial port B
(6) UPS port
Figure 7.4
Connect the power cables to these points. Both AC power cords must be plugged into the same
power grid / circuit.
 PCI slots conform to the PCI local bus specification (Rev. 2.1).
 64-bit bus, 33MHz (5.0 V) and 33/66MHz (3.3V) are supported.
 All RCI support long cards (31.19 cm, 12.3 in.).
8-pin DIN for power control
Dsub-9 pin for connecting the signal cable of an uninterruptible power supply
RJ11 connector for connecting the RCI cable and terminator (provided with the server unit)
(3) Base PCI slots
(4) Expansion PCI slots
Rear of PRIMEPOWER600 Pedestal Server
7.2 Names and Functions of Parts
(2) AC power inputs
(option)
121