Fujitsu Primepower200 User Manual page 173

(1), (2) AC power inputs
Connect the power cables to these points. Both AC power cords must be plugged into the same
power grid / circuit.
(3) Base PCI slots, (4) Expansion PCI slots (option)
 PCI slots conform to the PCI local bus specification (Rev. 2.1).
 64-bit bus, 33MHz (5.0 V) and 33/66MHz (3.3V), are supported.
 All RCI support long cards (31.19 cm, 12.3 in.).
(5) Power control port (label : PC)
8-pin DIN for power control
(6) UPS port (label : UPS)
Dsub-9 pin for connecting the signal cable of an uninterruptible power supply
(7) RCI port (label : RCI)
RJ11 connector for connecting the RCI cable and terminator (provided with the server unit)
(8), (9) Serial ports (label : SERIAL A/B)
Dsub-25 pin ports for connecting a console terminal when performing maintenance on the server
unit using the RS-232C interface
(10) Keyboard port (label : KB)
8-pin DIN port for connecting a keyboard cable
(11) 100Base-TX port (label : LAN)
RJ45 connector automatically recognizes at 10Mbps/100Mbps
8.2 Names and Functions of Parts
145