Figure 7.5 Turning The Power On - Fujitsu Primepower200 User Manual

Procedure
1
Turn the AC main line power on.
2
Turn the power switches of the console terminal and peripheral devices on.
3
Press the POWER switch on the control panel of the PRIMEPOWER600 Pedestal Server.
The POWER LEDs of the PRIMEPOWER Server and any peripheral devices connected via the
RCI port should now light up.
Note:
Operation of the POWER switch is disabled when the MODE switch is set to SECURE.
A keyboard power-on function is not supported.

Figure 7.5 Turning the power on

7.3 Preparations for Use
127