Programming For Automatic Operation; Prepare Controller For Programming; Set Clock To Current Time And Day - Toro VISION II Series Owner's Manual

Programming For Automatic Operation

STEP 1 - Prepare Controller For Programming
Remove lower cabinet cover.
Assure Run/Program Switch is
positioned to "RUN"
Observe display:
– If it is flashing, continue to STEP 2.
– If it reads OFF, press On/Off Key;
continue to STEP 2.
– If it shows incorrect time and/or
day, continue to STEP 2.
STEP 2 - Set Clock To Current Time and Day
To Set Time:
Press and hold Set Time Key until
display advances to current time.
Note: Digits will advance rapidly
after 10 consecutive seconds.
To Set Day:
Press Set Day Key repeatedly until
current day (abbreviation) is
displayed.
OR
OR
RUN PROGRAM
STEP 2
STEP 2
STEP 2
CURRENT
TIME
CURRENT
DAY
5