Monitoring Rip Routing Information - Juniper J-Series Administration Manual

J-series Services Router Administration Guide
Table 54: Summary of Key OSPF Routing Output Fields (continued)
Field Values
Area Number of the area that the interface is in.
DR ID Address of the area's designated router.
BDR ID Address of the area's backup designated router.
Nbrs Number of neighbors on this interface.
OSPF Statistics
Packet Type of OSPF packet.
Type
Total Total number of packets sent and received.
Sent/Total
Received
Last 5 Total number of packets sent and received in the last
seconds 5 seconds.
Sent/Last 5
seconds
Received
Receive Number and type of receive errors.
errors

Monitoring RIP Routing Information

To view RIP routing information, select Monitor>Routing>RIP Information, or
enter the following CLI commands:
Table 55 on page 120 summarizes key output fields in the RIP routing display.
Table 55: Summary of Key RIP Routing Output Fields
Field Values
RIP Statistics
Rip info Information about RIP on the specified interface,
including UDP port number, hold-down interval (during
which routes are neither advertised nor updated), and
timeout interval.
Logical Name of the logical interface on which RIP is
interface configured.
Routes Number of RIP routes learned on the logical interface.
learned
120
Using the Monitoring Tools
show rip statistics
show rip neighbors
Additional Information
Additional Information