Juniper J-Series Administration Manual page 261

To quit the
Table 122: CLI traceroute monitor Command Options
Option
host
count number
inet
inet6
interval seconds
no-resolve
bytes
size
source address
summary
Following is sample output from a
user@host> traceroute monitor host2
host (0.0.0.0)(tos=0x0 psize=64 bitpattern=0x00)
Wed Mar 14 23:14:11 2007
Keys: Help Display mode
Pings
Host
Last Avg Best Wrst StDev
1. 173.24.232.66
9.4 8.6 4.8 9.9
2. 173.24.232.66
7.9 17.2 7.9 29.4 11.0
3. 173.24.232.66
9.9 9.3 8.7 9.9
4. 173.24.232.66
9.9 9.8 9.5 10.0
Table 123 on page 240 summarizes the output fields of the display.
traceroute monitor
Description
Sends traceroute packets to the hostname or IP address you specify.
(Optional) Limits the number of ping requests, in packets, to send in summary mode. If you do
not specify a count, ping requests are continuously sent until you press Q.
(Optional) Forces the traceroute packets to an IPv4 destination.
(Optional) Forces the traceroute packets to an IPv6 destination.
(Optional) Sets the interval between ping requests, in seconds. The default value is
(Optional) Suppresses the display of the hostnames of the hops along the path.
(Optional) Sets the size of the ping request packet. The size can be from
The default packet size is bytes.
64
(Optional) Uses the source address that you specify, in the traceroute packet.
(Optional) Displays the summary traceroute information.
Restart statistics
2.1
0.5
0.2
Chapter 12: Using Services Router Diagnostic Tools
command, press Q.
command:
traceroute monitor
My traceroute [v0.69]
Order of fields quit
Using CLI Diagnostic Commands
1 second.
through bytes.
0 65468
Packets
Loss% Snt
0.0% 5
0.0% 5
0.0% 5
0.0% 5
239