Juniper J-Series Administration Manual page 127

Table 47: J-Web Monitor Options and Corresponding CLI show Commands (continued)
Monitor Option Function
DHCP Displays DHCP dynamic and static leases, conflicts, pools, and
statistics.
For details, see "Monitoring DHCP" on page 143.
RPM Displays probe results for all RPM probes configured on the
Services Router, including the round–trip times, jitter, and loss
percentage of probes sent. Additionally, the RPM monitoring page
displays a graph that plots the probe results as a function of time.
For details, see "Monitoring RPM Probes" on page 145.
PPPoE Displays the following PPPoE information:
PPPoE Interfaces—Session-specific information about the
interfaces on which PPPoE is enabled.
PPPoE Statistics—Statistics for PPPoE sessions currently
active.
PPPoE Version—Information about the PPPoE protocol
currently configured on the router.
For details, see "Monitoring PPPoE" on page 148.
Media Gateway Displays the following TGM550 Media Gateway information:
Dynamic Call Admission Control Information—Displays
maximum bandwidth available for voice traffic and the
dynamic call admission control (CAC) properties configured
on the router WAN interfaces.
Telephony Gateway Module Information—Displays
information about TGM550 connectivity and digital signal
processor (DSP) capacity.
Telephony Interface Module Information—Displays the online
and offline status of telephony interface modules (TIMs)
installed in a J-series router.
For details, see "Monitoring the TGM550 Media Gateway
(VoIP)" on page 151.
Filtering Command Output
For operational commands that display output, such as the
can redirect the output into a filter or a file. When you display help about these
commands, one of the options listed is
command output.
For example, if you enter the
Router configuration is displayed on the screen. To limit the display to only those
Chapter 7: Monitoring the Router and Routing Operations
Corresponding CLI Commands
show system services dhcp binding
show system services dhcp conflict
show system services dhcp pool
show system services dhcp
statistics
show services rpm probe-results
PPPoE interfaces—
interfaces
PPPoE statistics—
statistics
PPPoE version—
version
Dynamic call admission control
information—
dynamic-call-admission-control
Telephony Gateway Module
information—
slot-number
media-gateway-controller
tgm fpc slot-number dsp-capacity
Telephony Gateway Module
status—
telephony-interface-module status
| , called a pipe, which allows you to filter the
command, the complete Services
show configuration
show pppoe
show pppoe
show pppoe
show tgm
show tgm fpc
and
show
show tgm
commands, you
show
105
Monitoring Overview