Juniper J-Series Administration Manual page 273

Table 132: CLI monitor traffic Arithmetic, Binary, and Relational Operators (continued)
Operator Description
A match occurs if the first expression is not equal to the second.
!=
Following is sample output from the
user@host> monitor traffic count 4 matching "arp" detail
Listening on fe-0/0/0, capture size 96 bytes
15:04:16.276780
15:04:16.376848
15:04:16.376887
15:04:16.601923
Chapter 12: Using Services Router Diagnostic Tools
monitor traffic
In arp who-has 193.1.1.1 tell host1.site2.net
In arp who-has host2.site2.net tell host1.site2.net
In arp who-has 193.1.1.2 tell host1.site2.net
In arp who-has 193.1.1.3 tell host1.site2.net
command:
Using CLI Diagnostic Commands
251