Juniper J-Series Administration Manual page 126

Juniper networks router administration guide
Hide thumbs Also See for J-Series:
Table of Contents

Advertisement

J-series
Services Router Administration Guide
Table 47: J-Web Monitor Options and Corresponding CLI show Commands (continued)
Monitor Option
Function
MPLS
Displays information about MPLS label-switched paths (LSPs) and
virtual private networks (VPNs) through the following options:
Interfaces—Information about the interfaces on which MPLS
is enabled, including operational state and any administrative
groups applied to an interface.
LSP Information—Information about LSP sessions currently
active on the Services Router, including inbound (ingress) and
outbound (egress) addresses, LSP state, and LSP name.
LSP Statistics—Statistics for LSP sessions currently active on
the Services Router, including the total number of packets
and bytes forwarded through an LSP.
RSVP Sessions—Information about RSVP-signaled LSP
sessions currently active on the Services Router, including
inbound (ingress) and outbound (egress) addresses, LSP state,
and LSP name.
RSVP Interfaces—Information about the interfaces on which
RSVP is enabled, including the interface name, total
bandwidth through the interface, and total current reserved
and reservable (available) bandwidth on the interface.
For details, see "Monitoring MPLS Traffic Engineering
Information" on page 130.
Service Sets
Displays information about configured service sets.
For details, see "Monitoring Service Sets" on page 135.
Firewall
Displays firewall and intrusion detection service (IDS) information
through the following options:
Stateful Firewall—Displays the stateful firewall configuration.
IDS Information—Displays information about the configured
IDS.
For details, see "Monitoring Firewalls" on page 136.
IPSec
Displays configured IPSec tunnels and statistics, and IKE security
associations.
For details, see "Monitoring IPSec Tunnels" on page 140.
NAT
Displays configured NAT pools.
For details, see "Monitoring NAT Pools" on page 142.
104
Monitoring Overview
Corresponding CLI Commands
Interfaces—
show mpls interface
LSP information—
show mpls lsp
LSP Statistics—
show mpls lsp
statistics
RSVP Sessions—
show rsvp session
RSVP Interfaces—
show rsvp
interface
show services service-sets
summary
show services service-sets
memory-usage
Stateful firewall information
show services stateful-firewall
conversations
show services stateful-firewall
flows
IDS information
show services ids
destination-table
show services ids source-table
show services ids pair-table
show services ipsec-vpn ipsec
statistics
show services ipsec-vpn ipsec
security-associations
show services ipsec-vpn ike
security-associations
show services nat pool

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents