Juniper J-Series Administration Manual page 166

J-series Services Router Administration Guide
Table 76: Summary of DHCP Output Fields (continued)
Field Values
Binding Type of binding assigned to the client:
Type
static .
Lease
Date and time the lease expires, or
Expires that do not expire.
DHCP Conflicts
Detection Date and time the client detected the conflict.
Time
Detection How the conflict was detected.
Method
Address IP address where the conflict occurs.
DHCP Pools
Pool Name Subnet on which the IP address pool is defined.
Low Lowest address in the IP address pool.
Address
High Highest address in the IP address pool.
Address
Excluded Addresses excluded from the address pool.
Addresses
DHCP Statistics
Default Lease time assigned to clients that do not request a
lease time specific lease time.
Minimum Minimum time a client can retain an IP address lease
lease time on the server.
Maximum Maximum time a client can retain an IP address lease
lease time on the server.
Packets Total number of packets dropped and the number of
dropped packets dropped due to a particular condition.
Messages Number of BOOTREQUEST, DHCPDECLINE,
received DHCPDISCOVER, DHCPINFORM, DHCPRELEASE,
and DHCPREQUEST messages sent from DHCP clients
and received by the DHCP server.
Messages Number of BOOTREPLY, DHCPACK, DHCPOFFER,
sent and DHCPNAK messages sent from the DHCP server
to DHCP clients.
144
Using the Monitoring Tools
Additional Information
or DHCP servers can assign a
dynamic
of IP addresses or a
specific IP addresses.
never for leases
Only client-detected conflicts are displayed.
The addresses in the conflicts list remain excluded until
you use the
to manually clear the list.
binding from a pool
dynamic
static binding to one or more
clear system services dhcp conflict command