Juniper J-Series Administration Manual page 147

Table 58: Summary of Key CoS Classifier Output Fields (continued)
CoS Value Type
Index
Incoming CoS Value
Assign to Forwarding Class
Assign to Loss Priority
Monitoring CoS Value Aliases
To display information about the CoS value aliases that the system is currently using
to represent DSCP, DSCP IPv6, MPLS EXP, and IPv4 precedence bits, select
Monitor>Class of Service>CoS Value Aliases in the J-Web interface, or enter the
following CLI command:
show class-of-service code-point-aliases
Table 59 on page 126 summarizes key output fields for CoS value aliases.
The classifiers are displayed by type:
dscp —All classifiers of the DSCP type.
—All classifiers of the DSCP
dscp ipv6
IPv6 type.
exp —All classifiers of the MPLS EXP
type.
—All classifiers of the IEEE
ieee-802.1
802.1 type.
inet-precedence —All classifiers of the
IP precedence type.
Internal index of the classifier.
CoS value of the incoming packets, in bits.
These values are used for classification.
Forwarding class that the classifier assigns
to an incoming packet. This class affects the
forwarding and scheduling policies that are
applied to the packet as it transits the router.
Loss priority value that the classifier assigns
to the incoming packet based on its CoS
value.
Chapter 7: Monitoring the Router and Routing Operations
Using the Monitoring Tools
125