Juniper J-Series Administration Manual page 151

Table 62: Summary of Key CoS Rewrite Rules Output Fields (continued)
Field
Forwarding Class
Loss Priority
Rewrite CoS Value To
Monitoring CoS Scheduler Maps
To display assignments of CoS forwarding classes to schedulers, select Monitor>Class
of Service>Scheduler Maps in the J-Web interface, or enter the following CLI
command:
show class-of-service scheduler-map
Table 63 on page 129 summarizes key output fields for CoS scheduler maps.
Table 63: Summary of Key CoS Scheduler Maps Output Fields
Field
Scheduler Map
Index
Scheduler Name
Forwarding Class
Transmit Rate
Rate Limit
Values
Forwarding class that in combination with
loss priority is used to determine CoS values
for rewriting.
Loss priority that in combination with
forwarding class is used to determine CoS
values for rewriting.
Value that the CoS value is rewritten to.
Values
Name of a scheduler map.
Index of a specific object—scheduler maps,
schedulers, or drop profiles.
Name of a scheduler.
Forwarding classes this scheduler is
assigned to.
Configured transmit rate of the scheduler
in bits per second (bps). The rate value can
be either of the following:
A percentage—The scheduler receives
the specified percentage of the total
interface bandwidth.
—The scheduler receives the
remainder
remaining bandwidth of the interface
after allocation to other schedulers.
Rate limiting configuration of the queue:
—No rate limiting.
none
—The queue transmits at only the
exact
configured rate.
Chapter 7: Monitoring the Router and Routing Operations
Additional Information
Rewrite rules are applied to CoS values in
outgoing packets based on forwarding class
and loss priority setting.
Additional Information
For details, click the plus sign (+).
Using the Monitoring Tools
129