Juniper J-Series Administration Manual page 60

J-series Services Router Administration Guide
1.
2.
3.
4.
Table 28: Configuring CHAP on Dialer Interfaces
Task
Define a CHAP access profile—for
example, usb-modem-access-profile
a client (username) named
and the secret
usb-modem-user
(password) my-secret .
Navigate to the appropriate dialer
interface level in the configuration
hierarchy—for example, dl0 unit 0
Configure CHAP on the dialer interface
and specify a unique profile name
containing a client list and access
parameters—for example,
.
usb-modem-access-profile
NOTE: Do not configure the
option from the [edit interfaces dl0 unit
hierarchy level.
0 ppp-options chap]
38
Configuring USB Modem Interfaces with a Configuration Editor
Navigate to the top of the configuration hierarchy in either the J-Web or CLI
configuration editor.
Perform the configuration tasks described in Table 28 on page 38.
If you are finished configuring the router, commit the configuration.
To verify the CHAP configuration, see "Verifying the USB Modem
Configuration" on page 42.
J-Web Configuration Editor
1. In the J-Web interface, select
Configuration>View and
with
Edit>Edit Configuration.
2. Next to Access, click Configure or
Edit.
3. Next to Profile, click Add new
entry.
4. In the Profile name box, type
usb-modem-access-profile
5. Next to Client, click Add new
entry.
6. In the Name box, type
usb-modem-user
7. In the Chap secret box, type
my-secret .
8. Click OK.
9. Repeat Steps 5 through 8 for each
client to be included in the CHAP
profile.
10. Click OK until you return to the
Configuration page.
1. On the Configuration page next to
Interfaces, click Edit.
.
2. In the Interface name column, click
dl0.
3. Under Unit, in the Interface unit
number column, click 0.
1. Next to Ppp options, click
Configure.
2. Next to Chap, click Configure.
3. In the Access profile box, type
usb-modem-access-profile
passive
4. Click OK.
CLI Configuration Editor
1. From the
enter
edit access
2. Enter
set profile usb-modem-access-profile
client usb-modem-user chap-secret
my-secret
.
3. Repeat Step 2 for each client to be
included in the CHAP profile.
.
From the
edit interfaces dl0 unit 0
Enter
set ppp-options chap access-profile
usb-modem-access-profile
.
hierarchy level,
[edit]
[edit] hierarchy level, enter