Table 93: Summary of Key Alarm Output Fields (continued)
Field
Values
Received at
Date and time when the alarm condition was
detected.
Severity
Alarm severity—either major (red) or minor (yellow).
Subject
Brief synopsis of the alarm.
Detailed Alarm Message
Received at
Date and time when the failure was detected.
Severity
Alarm severity—either major (red) or minor (yellow).
Alarm Type
Category of the alarm:
Chassis—Indicates an alarm condition on the
chassis (typically an environmental alarm such
as temperature)
Configuration—Indicates that no rescue
configuration is set
ETHER—Indicates an alarm condition on an
Ethernet interface
DS3—Indicates an alarm condition on a DS3
interface
License—Indicates a software license
infringement
Serial—Indicates an alarm condition on a serial
interface
Services—Indicates an alarm condition on the
services module
Verifying the Alarms Configuration
To verify alarms configuration, perform the following task.
Displaying Alarm Configurations
Verify the configuration of the alarms.
Purpose
From the J-Web interface, select
Action
Configuration>View and Edit>View Configuration Text. Alternatively, from
configuration mode in the CLI, enter the
[edit]
user@host# show chassis alarms
t3 {
Chapter 9: Configuring and Monitoring Alarms
Additional Information
A major (red) alarm condition requires immediate action.
A minor (yellow) condition requires monitoring or
maintenance.
Clicking the alarm subject displays a detailed alarm
message.
A major (red) alarm condition requires immediate action.
A minor (yellow) condition requires monitoring or
maintenance.
show chassis alarms
Verifying the Alarms Configuration
command.
175