Juniper J-Series Administration Manual page 95

Table 38: Sample DHCP Server Configuration Settings (continued)
Settings
Address pool subnet address
High address in the pool range
Low address in the pool range
Address pool default lease time, in seconds
Address pool maximum lease time, in seconds
Domain search suffixes
Address to exclude from the pool
DNS server address
Identifier code for router solicitation address option
Type choice for router solicitation address option
IP address for router solicitation address option
DHCP MAC Address Configuration
Static binding MAC address
Fixed address
To configure the Services Router as a DHCP server for a subnet and a single client:
Navigate to the top of the configuration hierarchy in either the J-Web or CLI
1.
configuration editor.
Perform the configuration tasks described in Table 39 on page 74.
2.
If you are finished configuring the router, commit the configuration.
3.
To verify DHCP server configuration and operation, see "Verifying a DHCP Server
4.
Configuration" on page 75.
Chapter 4: Configuring the Router as a DHCP Server
Sample Value or Values
192.168.2.0/24
192.168.2.254
192.168.2.2
1,209,600
2,419,200
mycompany.net
mylab.net
192.168.2.33
192.168.10.2
32
Ip address
192.168.2.33
01:03:05:07:09:0B
192.168.2.50
Configuring the DHCP Server with a Configuration Editor
(14 days)
(28 days)
73