Juniper J-Series Administration Manual page 286

J-series Services Router Administration Guide
Verify that the output shows the intended file configuration for capturing packets.
Meaning
For more information about the format of a configuration file, see the information
Related Topics
about viewing configuration text in the J-series Services Router Basic LAN and WAN
Access Configuration Guide.
Displaying a Firewall Filter for Packet Capture Configuration
Verify the firewall filter for packet capture configuration.
Purpose
From the J-Web interface, select
Action
Configuration>View and Edit>View Configuration Text. Alternatively, from
configuration mode in the CLI, enter the
Verify that the output shows the intended configuration of the firewall filter for
Meaning
capturing packets sent to the destination address 192.168.1.1/32.
For more information about the format of a configuration file, see the information
Related Topics
about viewing configuration text in the J-series Services Router Basic LAN and WAN
Access Configuration Guide.
Verifying Captured Packets
Verify that the packet capture file is stored under the
Purpose
packets can be analyzed offline.
Take the following actions:
Action
264
Displaying a Firewall Filter for Packet Capture Configuration
}
[edit]
user@host# show firewall filter dest-all
term dest-term {
from {
destination-address 192.168.1.1/32;
}
then {
sample;
accept;
}
}
Disable packet capture. See "Disabling Packet Capture" on page 261.
Perform these steps to transfer a packet capture file (for example,
to a server where you have installed packet analyzer tools (for example,
), using FTP.
tools-server
From the CLI configuration mode, connect to
1.
user@host# run ftp tools-server
Connected to tools-server.mydomain.net
220 tools-server.mydomain.net FTP server (Version 6.00LS) ready
show firewall filter dest-all
directory and the
/var/tmp
tools-server using FTP:
command.
),
126b.fe-0.0.1