Mazda CX-7 2007 Workshop Manual page 1048

AUTOMATIC TRANSAXLE [AW6A-EL, AW6AX-EL]
11. Remove the lock plate, and pull out the TFT
sensor from the control valve body.
12. Remove the O-ring from the TFT sensor.
Note
• Be sure to secure the coupler component
with tape so that it will not interfere with the
control valve body component.
13. Fix the coupler component with tape to the
transaxle case as shown in the figure.
14. Remove the VSS connector and input/turbine
speed sensor connector from the solenoid clamp.
VSS CONNECTOR
Note
• Be sure to secure the VSS and input/turbine speed sensor with tape so that they will not interfere with the
control valve body component.
15. Fix the VSS wiring harness and input/turbine
speed sensor wiring harness with tape to the
transaxle case as shown in the figure.
05-17–40
INPUT/TURBINE SPEED SENSOR
CONNECTOR
acxuuw00000590
acxuuw00000591
acxuuw00000592
acxuuw00000593