Magnetic switch
1. Inspect for continuity between terminals S and M
using a tester.
• If there is no continuity, replace the magnetic
switch.
2. Inspect for continuity between terminal S and the
body using a tester.
• If there is no continuity, replace the magnetic
switch.
3. Verify that there is no continuity between
terminals M and B using a tester.
• If there is continuity, replace the magnetic
switch.
Brush and brush holder
1. Verify that there is no continuity between each
insulated brush and plate using a tester.
• If there is continuity, replace the brush holder.
01-19–6
STARTING SYSTEM [L3 WITH TC]
TERMINAL M
TERMINAL S
TERMINAL B
TERMINAL S
acxuuw00002049
acxuuw00002050
TERMINAL M
acxuuw00002051
acxuuw00002052