Mazda CX-7 2007 Workshop Manual page 1254

STEP
3 INSPECT SAS CONTROL MODULE
• Turn the ignition switch to the LOCK position.
• Connect the SAS control module connector.
• Connect the clock spring connector.
• Connect the passenger-side air bag module
connector.
• Connect the driver-and passenger-side
curtain air bag module connectors.
• Connect the driver-and passenger-side side
air bag module connectors.
• Connect the driver-and passenger-side pre
tensioner seat belt connectors.
• Connect the seat track position sensor
connector.
• Turn the ignition switch to the ON position.
• Are DTCs C1947, C1948 and/or C1981
indicated?
End Of Sie
08-02–52
ON-BOARD DIAGNOSTIC
INSPECTION
Yes [Present malfunction diagnosis]
• Replace the SAS control module.
(See 08-10-10 SAS CONTROL MODULE REMOVAL/
INSTALLATION.)
[Past malfunction diagnosis]
• DTC troubleshooting completed.
No DTC troubleshooting completed.
ACTION