Mazda CX-7 2007 Workshop Manual page 1276

4. Align the marks.
End Of Sie
CLOCK SPRING INSPECTION
1. Verify that the continuity is as indicated in the table.
• If not as indicated in the table, replace the clock spring.
Note
• When the vehicle-side connector for the clock spring is disconnected, terminals 1A, 1B, 1C and 1D are
shorted to prevent unexpected operation (deployment) of the air bag module.
Test
condi-
1A 1B 1C 1D 2A 2B 2C 2D 2E
tion
Under
any
condi-
tion
08-10–16
AIR BAG SYSTEM
ALIGNMENT MARKS
Terminal
2G 2H 3A 3B 4A 4B 5A 5B 5C 5D 5E
acxuuw00001598
id081000802200
: Continuity
5G 5H
acxuuw00001599