Mazda CX-7 2007 Workshop Manual page 1400

SYMPTOM TROUBLESHOOTING [POWER WINDOW SYSTEMS (AUTO-OPEN/
• Inspect for DTCs or malfunctions by slightly
shaking wiring harnesses and connectors
that are suspected of causing the
malfunction.
Connector Terminal Check Method
1. Inspect the connection condition of each female terminal.
2. Insert the male terminal into the female terminal
to inspect for looseness.
End Of Sie
BASIC POWER WINDOW SYSTEM INSPECTION[POWER WINDOW SYSTEMS (AUTO-OPEN/CLOSE
FUNCTION)]
Manual Mode Function Inspection
STEP
• Turn the ignition switch to the ON position.
1
• Turn the power-cut switch to UNLOCK.
• Does each door glass move up and down in
manual mode using the power window
subswitch?
• Does the driver-side door glass move up and
2
down in manual mode using the power
window main switch?
09-03A–4
CLOSE FUNCTION)]
INSPECTION
Yes Go to the next step.
• Inspect the following items:
No
— Power window main switch (power-cut switch system
malfunction)
— Power window subswitch power supply fuses
— Power window subswitch ground wiring harness
— Power window subswitch power supply wiring
harnesses
— Wiring harness between power window subswitch
and power window motor
— Power window subswitch
— Power window motor
• Repair or replace the malfunctioning part, then go to the
next step.
Yes Go to the next step.
• Inspect the following items:
No
— Power window main switch power supply fuses
— Power window main switch ground wiring harness
— Power window main switch power supply wiring
harnesses
— Wiring harness between power window main switch
and power window motor
— Power window main switch
• Repair or replace the malfunctioning part, then go to the
next step.
acxuuw00000934
acxuuw00000935
id090360805500
ACTION