Mazda CX-7 2007 Workshop Manual page 1180

BLOWER MOTOR REMOVAL/INSTALLATION
1. Disconnect the negative battery cable.
2. Remove the dashboard under cover (passenger's side).
3. Remove in the order indicated in the table.
1 Blower motor connector
2 Blower motor
4. Install in the reverse order of removal.
End Of Sie
BLOWER MOTOR INSPECTION
1. Connect battery positive voltage to terminal B and
ground to terminal A of the blower motor and
verify its operation.
• If not as specified, replace the blower motor.
End Of Sie
WM: EVAPORATOR TEMPERATURE SENSOR
EVAPORATOR TEMPERATURE SENSOR REMOVAL/INSTALLATION
1. Remove the evaporator temperature sensor from the A/C unit. (See 07-11-4 A/C UNIT DISASSEMBLY/
ASSEMBLY.)
End Of Sie
07-40–8
CONTROL SYSTEM
B
B
M
A
id074000800900
2
1
acxuuw00000720
id074000801000
A
acxuuw00000721
id074000801100