Mazda CX-7 2007 Workshop Manual page 1041

AUTOMATIC TRANSAXLE [AW6A-EL, AW6AX-EL]
(1) Install the right rear shaft of the SST to the
bolt of the right shock absorber as shown in
the figure.
(2) Install the left rear shaft of the SST to the bolt
of the left shock absorber. (Identical position
to the right side)
(3) Temporarily tighten the air clear bracket
installation bolt, and install the left/right front
shaft of the SST with front foot No.2 to the bolt
as shown in the figure.
(4) Adjust the positions of the SST side bars so
that they are the same height (left and right)
and horizontal.
(5) Make sure each joint is securely tightened.
2. Support the engine using the SST.
3. Remove the No.4 engine mount bracket.
49 C017 5A0
49 C017 5A0
LH
49 C017 5A0
RH
acxuuw00000224
05-17
acxuuw00000225
49 C017 5A0
acxuuw00000226
05-17–33