Mazda CX-7 2007 Workshop Manual page 1050

AUTOMATIC TRANSAXLE [AW6A-EL, AW6AX-EL]
On-Vehicle Installation
Caution
• When installing the control valve body component, do not put the coupler component in the open
space of the separate plate in the control valve body component.
• Do not pinch the coupler component between the separate plate and the control valve body
component.
1. Connect the manual valve link and install the
control valve body component.
2. Temporarily install the control valve body
component with the bolts.
Bolt length (measured from below the head)
A: 31 mm {1.220 in}
B: 17 mm {0.669 in}
C: 21 mm {0.827 in}
Note
• Aligning the bolt holes, temporarily tighten
the bolt by hand.
3. Temporarily install the suction cover and a new
gasket with the bolts.
05-17–42
SEPARATE PLATE
A
B
C
acxuuw00000597
B
B
C
acxuuw00000598
acxuuw00000594