Dsc Address Id - Icom M506 31 Instruction Manual

7
DSC OPERATION

DSC address ID

■
D Programming Individual ID
A total of 100 DSC address IDs can be programmed and as-
signed a name of up to 10 characters.
Enter "INDIVIDUAL ID" in the DSC SETTINGS menu.
q
➪ DSC SET
MENU
(Push [MENU]) (Select icon)
Push [ADD].
w
• The "INDIVIDUAL ID" program screen is displayed.
Enter a desired individual ID in the following way:
e
• Select a desired number using [Y]/[Z]/[Ω]/[≈].
• Push [ENT] or dial to set it.
• To move the cursor, rotate dial or select either arrow, "←" or "→,"
then push [ENT] or dial.
The first digit is specified as '0' for a Group ID.
The first two digits are '0' for any Coast station ID.
r Repeat step e to enter all 9 digits.
19
➪ Individual ID
(Rotate dial, then push [ENT].)
t After entering the 9 digit code, push [ENT] or dial to set it.
• The ID name programming screen is displayed.
y Enter a desired 10 digit ID name in the following way:
• Select a desired character using [Y]/[Z]/[Ω]/[≈].
• Push [ENT] or dial to set it.
• To move the cursor, rotate dial or select either arrow, "←" or "→,"
then push [ENT] or dial.
• Push [123] then [!$?] then [ABC] to select a character group.
u After entering the ID name, select "FINISH" using [Y]/[Z]/
[Ω]/[≈], then push [ENT] to program it.
• The "INDIVIDUAL ID" list screen is displayed.
i Push [MENU] to exit the MENU screen.