EPSON AcuLaser C1100
4.8.4 HOLDER ASSY-BIAS
REMOVAL
1.
Remove COVER ASSY RH.
(p.301)
2.
Remove WIRE ASSY DEVE connected to HOLDER ASSY-BIAS.
3.
Unhook the hook on HOLDER ASSY-BIAS from the main unit, and slide down,
match the protrusion on HOLDER ASSY-BIAS with the notch on the main unit,
and remove HOLDER ASSY-BIAS.
REINSTALLATION
1.
Match the protrusion on HOLDER ASSY-BIAS with the notch of the attachment
hole on the main unit, and attach, and slide HOLDER ASSY-BIAS upwards and
fasten with a hook.
2.
Attach WIRE ASSY DEVE to HOLDER ASSY-BIAS.
3.
Attach COVER ASSY RH.
(p.301)
DISASSEMBLY AND ASSEMBLY
Figure 4-91. Removal of HOLDER ASSY-BIAS
DEVE
Revision B
3)-2
2)
3)-1
Leg_Sec03_092FB
381