Wiring Connection Diagrams; Marks Used In The Overall Wiring Connection Diagram - Epson AcuLaser C1100 Service Manual

EPSON AcuLaser C1100

7.2 Wiring Connection Diagrams

7.2.1 Marks used in the Overall Wiring Connection Diagram

The table below shows how to interpret the Overall Wiring Connection Diagrams.
Table 7-4. List of the Marks
Name of signal line
Indicates a connection between parts by harness, wire, etc.
Indicates a connection that differs according to the specification.
Indicates a connection between parts by conductive materials
such as a leaf spring.
Indicates a connection between parts by tightening of screws.
Indicates Frame Ground.
Indicates a connector, and the connector No.
Indicates a connection terminal with an on-board leaf spring,
etc., and the connector (terminal) No.
Indicates a connector attached directly to the board, and the
connector No.
Box with a part name in it indicates the part.
APPENDIX
Remarks
Wiring Connection Diagrams
Table 7-4. List of the Marks
Name of signal line
Indicates a functional component in a part, and its name.
Indicates a section in
between Parts" (p519)
Indicates the screw for fastening conductive materials such as
leaf springs to harnesses.
Indicates conductive materials such as leaf spring.
Revision B
Remarks
"7.3 Wiring Connection Diagram
, and the section No.
517