Regular Replacement Parts - Epson AcuLaser C1100 Service Manual

EPSON AcuLaser C1100

6.5.2 Regular Replacement Parts

Part Name Part Code
FUSER ASSY 2090471
K 1292991
Y 1292994
HOUSING ASSY-
DEVE
M 1292996
C 1292999
2ND BTR ASSY 1292981
MAINTENANCE
Table 6-6. Maintenance Information on Regular Replacement Parts
Life (Pages) Service life indication
100,000 Worn Fuser
100,000 Worn K Dev Unit
Worn Y Dev Unit
66,700 Worn M Dev Unit
Worn C Dev Unit
100,000 ---
*1:The same function is also available in the reset menu.
Consumables and Components needing Periodic Replacement
Part to be replaced at
Remedy after Replacement
the same time
Execute "Reset Fuser Counter" in the
2ND BTR ASSY maintenance mode to reset the life
counter. *1
Execute "Reset X DvlpCounter" (X=Y,
PIVOT AD
M, C, K) in the maintenance mode to
reset the life counter.
PIVOT AD
After executing the counter reset, open
PIVOT AD and close the cover A. Do not turn the
printer off until the engine completely
PIVOT AD
stops.
Execute "Reset 2ndBTRCounter" in the
maintenance mode to reset the life
counter.
FUSER ASSY After executing the counter reset, open
and close the cover A. Do not turn the
printer off until the engine completely
stops.
Revision B
Remarks
While it can still be printed, it is desirable to
replace the unit. If printing is continued, the
FUSER UNIT breaks down for the last time
and the following troubles may be occurred.
• Fusing defect
• Stain of the back side
• Paper jam in the fusing section
While it can still be printed, it is
desirable to replace the unit.
The "PIVOT AD" is packed with the
ASP "HOUSING ASSY-DEVE".
While it can still be printed, it is desirable to
replace the unit.
507