EPSON AcuLaser C1100
2.7 Operating Modes
The printer has the following six operating modes:
WARM UP mode
: The printer is warming up (until the printer is ready for
printing).
READY mode
: The printer has finished the warm-up and is ready for
printing.
PRINTING mode
: The printer is currently printing.
LIGHT SLEEP mode : The FUSER is turned OFF to save power.
DEEP SLEEP mode
: In addition to the Fuser, +24VDC is also turned OFF to
save more power.
ERROR mode
: The printer has detected an error.
The following are not defined as the ERROR mode.
•
No paper (when the printer detects there is no paper in
the tray or cassette)
•
No paper tray (when the printer detects there is no paper
cassette)
•
Warnings relating to service life of consumables
OPERATING PRINCIPLES
Figure 2-53. Operating Modes Overview
Operating Modes
Revision B
109