Latch Assy Ad - Epson AcuLaser C1100 Service Manual

EPSON AcuLaser C1100

4.6.8 LATCH ASSY AD

REMOVAL
1. Remove COVER ASSY RH. (p.301)
2. Remove 2ND BTR ASSY. (p.348)
3. Remove FRAME ASSY-PH. (p.327)
4. Remove BCR CLN XERO ASSY.
5. Remove SENSOR TR-0. (p.361)
6. Remove GUIDE CRU ASSY AD.
7. Unhook SPRING-TORSION AD from the hook on GUIDE CRU ASSY AD.
8. Remove LATCH ASSY AD together with SPRING-TORSION AD from GUIDE
CRU ASSY AD.
9. Remove SPRING-TORSION AD from LATCH ASSY AD.
REINSTALLATION
1. Attach SPRING-TORSION AD to LATCH ASSY AD.
2. Attach LATCH ASSY AD together with SPRING-TORSION AD to GUIDE CRU
ASSY AD.
3. Hook SPRING-TORSION AD onto the hook on GUIDE CRU ASSY AD.
SPRING-TORSION AD must be firmly attached onto the hooks on
C A U T I O N
LATCH ASSY AD and GUIDE CRU ASSY AD.
(Do not attach SPRING-TORSION AD in the reverse direction)
4. Attach GUIDE CRU ASSY AD.
5. Attach SENSOR TR-0. (p.361)
6. Attach BCR CLN XERO ASSY.
7. Attach FRAME ASSY-PH. (p.327)
8. Attach 2ND BTR ASSY. (p.348)
9. Attach COVER ASSY RH. (p.301)
DISASSEMBLY AND ASSEMBLY
(p.373)
(p.367)
(p.367)
(p.373)
Figure 4-83. Removal of LATCH ASSY AD
XERO
Revision B
8)
7)
9)
CAUTION
Leg_Sec03_204FA
372