Status Sheet - Epson AcuLaser C1100 Service Manual

EPSON AcuLaser C1100

1.19 Status Sheet

There are two kinds of status sheet, the Status Sheet (Simplified version) and the Status
Sheet.
Status Sheet (Simplified version):
This can be printed using the printer operation panel. And also a Status Sheet on
which has no setting information printed by the printer driver is called "Simplified
version". The characters are printed in accordance with the display language
setting in black and white only.
Status Sheet (Full version):
Printing this sheet is executed from the printer driver and the printer setting
information can be acquired.
Status Sheet is shown in Figure 1-15 (p.68)
INFORMATION AT THE BOTTOM
1. Firmware version in DDYM format beginning with IA
2. Code ROM device type.
* : Flash
space : Mask
3. 4-digit CMTD (Color Matching Table Data) version beginning with A
4. Version of mechanical controller of the engine indicated by 10 figures beginning with
"MC"
5. Space
6. USB ID (31PXXXXXXXXXXXXXXX)
7. Latest connection status of the USB communication mode
H : HS
F : FS
space : No USB connection
8. USB communication mode
D : D4 compliant device connected
space : non D4 compliant device
9. Space (Type-B level)
10. IEEE1284 negotiation result
PRODUCT DESCRIPTION
and Figure 1-16 (p.69).
e : ECP
n : Nibble
space : Compatibility
11. Number of occurrences of jams indicated by JC and 6 figures
12. Number of replacements of Toner Cartridge indicated by IC and 12 figures, and
number of recoveries from errors (Toner Cartridge) indicated by 12 figures.
Maximum number of times: 255
There is a space between the number of replacements and the number of error
recoveries.
Both numbers are indicated in order of C, M, Y, K with 3 figures for each.
INFORMATION ON OPTIONS INSTALLED
1. RAM DIMM
2. Network interface board
NOTE: LAN HW Address, LAN HW Revision, LAN FW Revision are added to
Hardware Configuration
LAN HW Address is the MAC address
LAN HW Revision is always 0
The LAN FW Revision is network software version.
3. Optional paper cassette unit
Status Sheet (Simple version)
LC is added to the "Input Unit" under the
"Hardware Configuration".
4. Duplex unit
Status Sheet (Simple version)
Duplex is added to the "Input Unit"
under the "Hardware Configuration".
Status Sheet
Revision B
: Total amount of memory including the standard
RAM is indicated as "Installed Memory".
: Network menu and its setting items are indicated.
"Network" is added to the "Installed Interface".
Status sheet (Full version)
LC is added to the "Input Tray" under
the "Hardware Configuration".
t
Status sheet (Full version)
Duplex is added to the "Input Tray"
under the "Hardware Configuration".
67