Using the Roll Paper Holder
You will need the Roll Paper Holder to feed roll paper into the
printer in roll form.
Preparing the roll paper
Before printing, always prepare the paper as described below.
1. Check that the end of the roll is cut perpendicularly to the
edges as shown. If it is cut on a diagonal, recut it so that it is
perpendicular. For A4 and 329-mm width paper, cut along
the parallel lines on the back. For 89- and 100-mm width
paper, use a triangle.
c
1-8
Paper Handling
Caution:
Always use a triangle or other tool to ensure that the end of
the roll is cut perpendicularly. A diagonal cut may cause
paper feed problems.