Cover Top Side R - Epson AcuLaser C1100 Service Manual

EPSON AcuLaser C1100

4.2.5 COVER TOP SIDE R

REMOVAL
1. In the case of the DUPLEX specification, open DUPLEX ASSY.
2. In the case of the standard specification, open COVER FUSER.
3. Open COVER ASSY TOP.
4. Remove the screw (silver, with flange, 8 mm) fastening COVER TOP SIDE R to
the main unit.
5. Remove COVER TOP SIDE R from the main unit.
REINSTALLATION
1. Match the hole on COVER TOP SIDE R with the boss on the main unit.
2. Fasten COVER TOP SIDE R to the main unit with the screw (silver, with flange, 8
mm).
3. Close COVER ASSY TOP.
4. In the case of the standard specification, close COVER FUSER.
5. In the case of the DUPLEX specification, close DUPLEX ASSY.
DISASSEMBLY AND ASSEMBLY
(p.285)
(p.285)
COVER
Figure 4-7. Removal of COVER TOP SIDE R
Revision B
5)
4)
Leg_Sec03_503EA
287