Removing The Defective Tpm; Installing The New Tpm; Concluding Steps - Fujitsu PRIMERGY TX1310 M1 Upgrade And Maintenance Manual

14.3.3.2 Removing the defective TPM

Ê Remove the TPM as described in section
Ê Leave the TPM spacer on the system board when removing the defective
TPM.

14.3.3.3 Installing the new TPM

I
The TPM spacer is already present on the system board.
Ê Install the new TPM as described in section
page 196.

14.3.3.4 Concluding steps

"Installing the HDD cage" on page 59
Ê
"Installing the front cover" on page 48
Ê
Ê Install all removed accessible drives as described in section
accessible drives" on page
"Installing the side cover" on page 53
Ê
"Connecting the server to the mains" on page 54
Ê
"Switching on the server" on page 55
Ê
"Enabling BitLocker functionality" on page 74
Ê
TX1310 M1
49.
Upgrade and Maintenance Manual
System board and components
"Removing the TPM" on page
"Installing the TPM" on
200.
"Installing
205