Power supply
6.1
Replacing the power supply unit
Field Replaceable Unit
(FRU)
Tools: Phillips PH2 / (+) No. 2 screw driver
6.1.1
Preliminary steps
"Disabling BitLocker functionality" on page 63
Ê
"Shutting down the server" on page 40
Ê
"Disconnecting the server from the mains" on page 41
Ê
"Removing the side cover" on page 42
Ê
6.1.2
Removing the defective power supply unit
Figure 25: Disconnecting power cable
Ê While pressing the release latch on the connector, disconnect the PSU ATX
power connector from system board connector "POWER".
Ê Remove the screw to loosen the power supply (see circle).
80
Upgrade and Maintenance Manual
Hardware: 10 minutes
TX1310 M1