Removing The Defective Tpm; Installing The New Tpm; Concluding Steps - Fujitsu PRIMERGY RX2520 M4 Upgrade And Maintenance Manual

System board and components

15.3.3.2 Removing the defective TPM

Ê Remove the TPM, see section
Ê Leave the TPM spacer on the system board when removing the defective
TPM.

15.3.3.3 Installing the new TPM

I
The TPM spacer is already present on the system board.
Ê Install the TPM, see section

15.3.3.4 Concluding steps

"Installing the crossbar" on page 66
Ê
"Installing the fan holder" on page 64
Ê
"Installing the air duct" on page 62
Ê
"Reassembling" on page 55
Ê
"Connecting the power cord" on page 59
Ê
"Switching on the server" on page 60
Ê
"Resuming BitLocker functionality" on page 89
Ê
I
You can find information on configuring the TPM in the corresponding
BIOS Setup Utility reference manual.
360
"Removing the TPM" on page
"Installing the TPM" on page
Upgrade and Maintenance Manual
355.
352.
RX2520 M4