Minimum Startup Configuration - Fujitsu PRIMERGY TX1310 M1 Upgrade And Maintenance Manual

16.4

Minimum startup configuration

Field Replaceable Units (FRU)
If the server does not start up or other problems occur, it may be necessary to
take the system down to its most basic configuration in order to isolate the
defective component.
The minimum startup configuration consists of the following components and
cables:
Component
System board
CPU with CPU heat sink
CPU fan
1 memory module
Power supply unit
Table 6: Minimum startup configuration - components
Cable
Front panel cable
Power cable
Table 7: Minimum startup configuration - cables
"Shutting down the server" on page 40
Ê
"Disconnecting the server from the mains" on page 41
Ê
Ê Take the system down to its minimum startup configuration.
"Connecting the server to the mains" on page 54
Ê
Ê Connect a keyboard, mouse and display to the server.
"Switching on the server" on page 55
Ê
TX1310 M1
Notes
no TPM or expansion cards installed
installed in DIMM slot 1A
Notes
Upgrade and Maintenance Manual
Appendix
231