Removing The Defective Tpm - Fujitsu PRIMERGY RX2540 M4 Upgrade And Maintenance Manual

System board and components

16.3.3.2 Removing the defective TPM

Ê Remove the TPM, see section
Ê Leave the TPM spacer on the system board when removing the defective
TPM.
16.3.3.3 Installing the new TPM
I
The TPM spacer is already present on the system board.
Ê Install the TPM, see section
16.3.3.4 Concluding steps
"Installing the fan holder" on page 234
Ê
Ê If applicable, install the riser module 1, see section
on page 71.
"Installing the air duct" on page 89
Ê
"Reassembling" on page 63
Ê
"Connecting the power cord" on page 67
Ê
"Switching on the server" on page 70
Ê
"Resuming BitLocker functionality" on page 112
Ê
I
You can find information on configuring the TPM in the corresponding
BIOS Setup Utility reference manual.
512
"Removing the TPM" on page
"Installing the TPM" on page
Upgrade and Maintenance Manual
507.
503.
"Handling riser modules"
RX2540 M4