10.3.3 Concluding steps
"Installing the side cover" on page 53
Ê
"Connecting the server to the mains" on page 54
Ê
Ê If applicable,
"Updating or recovering the system board BIOS" on page 68
"Switching on the server" on page 55
Ê
"Enabling BitLocker functionality" on page 74
Ê
10.4
Replacing memory modules
Upgrade and Repair Unit
(URU)
Tools: tool-less
10.4.1 Preliminary steps
"Disabling BitLocker functionality" on page 63
Ê
"Shutting down the server" on page 40
Ê
"Disconnecting the server from the mains" on page 41
Ê
"Removing the side cover" on page 42
Ê
"Locating the defective component" on page 39
Ê
10.4.2 Removing the defective memory module
Ê Remove the memory module as described in section
module" on page
10.4.3 Installing the new memory module
Ê Install the memory module as described in section
module" on page
TX1310 M1
138.
136.
Upgrade and Maintenance Manual
Main memory
Hardware: 5 minutes
Software: 5 minutes
"Removing a memory
"Installing a memory
139