Front panel and front USB
13.1.5 Installing the On/Off button and the HDD activity
LED
Figure 137: Installing the On/Off button
Ê Insert the On/Off button in the direction shown until it snaps in place (1).
I
Take care of the orientation of the On/Off button. If it is installed in the
other direction, it does not work properly.
Ê Insert the HDD activity LED in the direction shown until it snaps into
place (2).
13.1.6 Concluding steps
"Installing the HDD cage" on page 59
Ê
"Installing the front cover" on page 48
Ê
Ê Install all removed accessible drives as described in section
accessible drives" on page
"Installing the side cover" on page 53
Ê
"Connecting the server to the mains" on page 54
Ê
"Switching on the server" on page 55
Ê
"Enabling BitLocker functionality" on page 74
Ê
186
49.
Upgrade and Maintenance Manual
"Installing
TX1310 M1