Handling Slot Brackets; Installing A Slot Bracket - Fujitsu PRIMERGY TX1310 M1 Upgrade And Maintenance Manual

Expansion cards and backup units
9.2

Handling slot brackets

9.2.1

Installing a slot bracket

Upgrade and Repair Unit
(URU)
Tools: Phillips PH2 / (+) No. 2 screw driver
Figure 64: Non-perforated slot bracket
1 Full height bracket non-perforated
Installing the slot bracket
Ê Place the controller on the mounting tabs on the slot bracket.
Ê Fasten the slot bracket to the controller with two M3 x 4.5 mm screws.
118 Upgrade and Maintenance Manual
Hardware: 5 minutes
TX1310 M1