Removing The Defective Tpm; Installing The New Tpm; Concluding Steps - Fujitsu PRIMERGY RX2530 M1 Upgrade And Maintenance Manual

System board and components

15.4.3.2 Removing the defective TPM

Ê Remove the TPM as described in section
Ê Leave the TPM spacer on the system board when removing the defective
TPM.

15.4.3.3 Installing the new TPM

I
The TPM spacer is already present on the system board.
Ê Install the TPM as described in section

15.4.3.4 Concluding steps

Ê Reinstall the system board as described in section
system board" on page 332
"Reassembling" on page 54
Ê
"Connecting the server to the mains" on page 60
Ê
"Switching on the server" on page 61
Ê
"Resuming BitLocker functionality" on page 95
Ê
I
You can find information on configuring the TPM in the corresponding
BIOS Setup Utility reference manual.
318 Upgrade and Maintenance Manual
"Removing the TPM" on page
"Installing the TPM" on page
"Installing the new
313.
310.
RX2530 M1